Intelligent shock detection system for walls
EASY INSTALLATION : One sensor per panel, modular product
RELIABILITY : Detection through vibration analysis
ROBUSTNESS : Extremely robust detector cable
Equipped with a new technology, G-WALL is specifically designed to detect shocks onwalls. The principle of detection through accelerometer is integrated into this product which then detects any attempt to pull out, cut and perforate the cladding panels of the building to be secured.
G-WALL contains a control unit which manages one or two detectionzones. Vibration sensors are integrated every 5m in the sensitive cable. These sensors transmit shock information to the control unit which analyses them and triggers alarm signals. Installed on the interior walls of a building, G-WALL offers up to 600 m of detection per system. One of the advantages of this system is its modularity which enables it to best adapt to the building to be secured. Moreover, a log is also available via a web server.
G-WALL is designed to detect shocks onwalls, by analysing the vibrations created during an intrusion attempt. Installed on interior walls, this product is suitable for monitoring big buildings such as warehouses, large retail sites and logistics centres..
G-WALL is easy to install as the sensor is fixed directly on the wall inside the building with the help of a screw-on plastic support. The same applies to thecontrol, termination or link units.
The modularity of the system also offers a big advantage. In fact, G-WALL is made up of 6 sections of 20 sensors each, and these sections can be connected differently according to the building’s configuration. The cables are freely distributed between the detection area within the limit of 600 m perdirection.
Once these items are installed, and the system powered up, the configuration and setting of G-WALL can work.
The G-WALL technology guarantees a high level of detection and is perfectly suited to shock detection on walls. Non detecting extensions are available for installing the product anywhere on the site. It is also possible to set sensitivity and the number of impacts. The settings and alarm logs are enabled remotely via the web server.
|Alarm outputs||2 intrusion alarms (1 per area) +1 technical alarm + 1 self-protection|
|Operating Temperature||-35°C to +70°C|
|System characteristics||600 m of detection distributed over 2 areas 1 management unit per system 20 sensors per 100 m cable|
To secure a fence and detect any intrusion attempt, a detector cable is installed on the fence. During an intrusion, the sensors will detect vibrations on the fence and send information to the Control Units, which in turn analyse the information received before triggering an alarm, or not. The cable is pre-assembled with -easy-to-install sensors helping to reduce installation costs.