Dual technology detector
RANGE : Up to 50 m curtain
RELIABILITY : No dead zone, complementary technologies
ALARM VERIFICATION : Association with video system
KAPIRIS II and III detectors are specially designed for outdoor perimeter detection. Based on the association of two technologies, these products can be used to secure areas in which it is difficult to install infrared barriers (hilly terrain, wiring constraints, etc.). The reliability of the product is guaranteed by the passive infrared sensor and the high-frequency sensor with Dopler effect, which create a real curtain.
With a maximum range of 50 m, the KAPIRIS product line is perfectly suited to complex sites, and with its technology there are no dead zones at the edge of the sensor. The sensors can also be associated with some video systems to carry out an effective alarm verification and, thus, reinforce the security level.
Two products make up the range of dual-technology detectors:
“KAPIRIS II: contact outputs only, can be deployed without software or setting device.
“KAPIRIS III: compatible with the MAXIBUS 3000 Hub, configurable via an integrated web server, complementary to the installation of MAXIRIS 3000 3100 barriers.
|KAPIRIS II||KAPIRIS III|
|Network compatibility||-||MAXIBUS 3000|
|SETTINGS » Range » Sensitivity » Anti-masking activation / deactivation » Possible ejection of one of the sensors||15 to 30 m PIR and Doppler No Yes||15 to 30 m PIR and Doppler Yes Yes|
|Configuration tools||Integrated (potentiometers and switches)||Web server|
|Positioning aid||LED + buzzer for making a WALK Test||LED + buzzer for making a WALK Test|
|Alarm information||Intrusion - Anti-masking through active IR - Self-protection||Intrusion - Anti-masking through active IR - Self-protection|
|Power supply||9.5 to 14.5 Vdc||9.5 to 14.5 Vdc|
|Protection rating||IP 55||IP 55|
|Dimensions (height x width x depth)||302 x 156 x 62mm||302 x 156 x 62mm|
It is important not to install the KAPIRIS detector in the direction of a traffic lane. The detection lobe should not be perpendicular to the direction of passage. Do not position the detector in the direction of a river, lake or any other moving liquid to avoid hampering its operation. Make sure that the area occupied by the detection lobe is perfectly maintained and well cleared. The nearest vegetation should not disturb the detection area in case of wind. KAPIRIS, II and III must be fixed between 2m and 3m above the ground.
The dual-technology detectors associate a passive infrared (PIR) sensor with a microwave sensor with Doppler effect. SORHEA has associated these two technologies to develop reliable detection solutions.
Infrared detection is based on an analysis of the temperature transmitted in the surveillance area. An intruder has a body temperature that sharply contrasts with the rest of the environment. The high-frequency antenna comprises a 24 GHz frequency transmitter (in K band) and a receiver with Doppler effect which detects signal variations caused by the passage of an object in the lobe. The association of these two technologies produces a reliable and high-performance solution by forming a non-physical light curtain or lobe (depending on sensor model).
If each technology may turn out to be sensitive to certain disturbances (PIR sensitivity to heat reflection, and Doppler sensitivity to water movements), a combination of both technologies becomes efficient since the advantages of each technology cancel the weaknesses of the other one. To trigger an alarm, both two technologies must detect an intrusion.