200° telemetric laser detector
PROTECTION OF FACADES : Detection curtain
RELIABILITY : Powerful detection algorithm
COMPACT SIZE : Discreet design and small dimensions of the detectors
Latest offer in the SORHEA product line, the PLS 200 laser detector is compact, with a discreet design and high detection reliability. The range comprises 2 detector types:
» PLS 200-35: 200° detection at a range of 35 m
» PLS 200-60: 200° detection at a range of 60 m
Like all SORHEA laser detectors, PLS 200 guarantees a fine and precise detection at all times. To stabilise and make detection reliable the configuration software fixes a minimum detection size and defines the event confirmation cycles before setting off an alarm.
The PLS 200 detector is designed to protect large areas in horizontal or vertical detection mode. PLS 200 effectively protects tertiary building roofs and façades, thanks to its discreet design and user-friendliness. The compactness of PLS 200-30 is also very suitable for the protection of classified villas and sites.
|SCANIRIS 200-35||SCANIRIS 200-60|
|Max. detection range||35m||60m|
|Max. detection range with 10% object reflectivity||25m max.||50m max.|
|Angular resolution||1 milliradian (0,057°)||1 milliradian (0,057°)|
|Number of tracked items||16 simultaneously||16 simultaneously|
|Scanning frequency||2Hz, 4Hz, 6Hz, 8Hz, 12Hz||2Hz, 4Hz, 6Hz, 8Hz, 12Hz|
|Infrared wavelength||905 nm||905 nm|
|Laser classification||Class 1||Class 1|
|Power supply||12Vdc - 0.7A (detector) 12Vdc - 3.5A (heater)||12Vdc - 0.7A (detector) 12Vdc - 3.5A (heater)|
|Alarm output Non-detection masks||RS 485 / dry contact Up to 5 groups of time-stamped masks||RS 485 / dry contact Up to 5 groups of time-stamped masks|
|Operating Temperature||-30°C to +60°C||-30°C to +60°C|
|Protection rating||IP 67||IP 67|
|Dimensions||185 x 120 x 110mm||185 x 120 x 110mm|
The laser detectors require strict and precise installation in order to guarantee an efficient and stable operation, regardless of the configuration of the site to be protected.
It is better to install the detectors in flat and cleared areas as the relief may create some dead zones where detection will not be effective.
Check that you fix the detector correctly so that it is perfectly stationary and does not generate unwanted activations.
Clear the detection area of any vegetation that may disturb the detection beam. Check that the detector is well located, taking into account the dead zones naturally created by the obstacles present in the detection field.
In case of façade protection, or any other application which requires vertical detection, the following recommendations must be followed to guarantee effective operation.
Mechanical orientation: the detector must be tilted in such a way as to create an angle of 5° minimum with the vertical support on which the device is fixed.
Clear the detection area of any vegetation that may disturb the detection beam.
Check that the detector is well located, taking into account the dead zones naturally created by the obstacles present in the detection field.
The working principle of the laser detection technology is based on flight time variations caused by an intrusion or changes in the detector’s reference environment. If an intruder cuts the infrared beam, the flight time values change and an alarm is triggered.
The infrared pulse wavelength is 905nm, i.e. above that of visible light, which makes the detection beam fully invisible to the naked eye and undetectable. With a maximum range of 300m at 360°, Sorhea Laser detectors are capable of protecting a very large surface with a single device. In case of horizontal protection, the detector scans the sensitive area through continuous parallel ground scanning. The detection environment is then fully covered by a horizontal detection beam.
Moreover, SORHEA laser detectors can optimise the use of a video system and make speedy and effective alarm verification (zoning function for up to 14 zones).