1 or 2 strand detection and electrical repulsion
Guaranteed site integrity and security : Very high repulsion power and detects any type of intrusion attempt
No structural work required : Simple installation on the existing fence of the site to be protected
Reliable detection : No false alarms
Principle
The SILUR system can electrify any existing fence by adding live strands. It guarantees detection and repulsion to prevent intrusion.
Any attempt to climb it, cross it or cut it is analysed and an alarm is immediately triggered.
Dual repulsion mode
Any intrusion attempt will be repelled by the action of the electrified fence.
Where a publicly accessible site has to be secured, a 24V low-voltage option is available for any electrification zone. This allows the fence’s detection ability to be maintained. The high-voltage mode will be reactivated once the site is closed to the public to ensure full repulsion power against any intrusion attempt.
Certifications
Our fence electrification systems have received French and Belgian APAVE certifications, and have been certified by Belgium’s Ministry of the Interior.
Fence electrification systems can be installed on a wide variety of sites:
-
waste collection
- car dealerships
- electrical distribution stations
- penitentiary institutions
- public buildings.
| SILUR FX | SILUR 360 |
| Fence single-overhang option | Fence Y-overhang option |
| Standard arrangement of 19 strands covering 2.4m | Standard arrangement of 12 strands covering 2.4m |
| Detects attempt to disturb any two high-voltage strands | Detects attempt to disturb any single high-voltage strand |
| 1 x 360° overhead sensor | 8 x 360° overhead sensors |
| Unaffected by weather conditions | Unaffected by weather conditions |
| Adapts to any type of existing fencing | Adapts to any type of existing fencing |
| No risk to public rights of way thanks to an installation 12cm from the perimeter fence | No risk to public rights of way thanks to an installation 12cm from the perimeter fence |
A 24V low-voltage option can be added to each electrification zone that automatically allows, when the high voltage is not activated, to detect the cut-off of the wires, while ensuring the safety of the nearby public or personnel passage, at the same time, inside the site.